Hyline-offroad JK LED LIGHT BAR MOUNT User Manual download pdf (Page 2)

Q:\Hyline Offroad, LLC\Installation Instructions\400.600.100 JK 50'' LIGHT BAR MOUNT\400.600.100 Installation Instructions.doc

Page 2 of 2

REV 1 9/7/2013

Light Bar Mount Installation

Step 1 – Using Torx Socket remove the 6 bolts in each windshield pillar. You will reuse the

original hardware so don’t throw them away.

Step 2 – Install both brackets with one rubber liner behind each to protect the vehicle’s painted

surface and reinstall original hardware. DO NOT TIGHTEN.

Step 3 – Now install you 50” Light Bar between both brackets. With mounting bracket hardware

still loose you can run the light wiring behind the brackets. This is only one option for

running wires. It is your decision to run wiring in any other way.

Step 4 – After wiring is run you can tighten the torx bolts and light bar hardware appropriately.

Send your OFFROAD pictures to

[email protected] . If we choose any one

of your pictures to be used on our website, We send you a FREE Hyline Offroad

T-Shirt.

PLEASE READ INSTRUC

TIONS BEFORE BEGINNING INSTALLATION

Installation instructions provided must be read and followed exactly when installing

product. Failure to do so could potentially result in injury or death of any occupants

in the vehicle. WEAR SEAT BELTS AT ALL TIMES WHEN DRIVING!

Though our products are rugged, they are primarily designed and built to enhance the appearance of the

vehicle and will not protect from death or injury in the event of an accident. Adhere to all vehicle

manufacturers specifications

Attention

1 2

No comments

Hyline-offroad JK LED LIGHT BAR MOUNT User Manual Page 2